Will it fit? Universal quick attach vs mini skid steer plates: how to measure, and which adapters exist

Published 2026-11-18. Prices and specs are as listed on the linked pages on that date and can change. Some links below are Amazon affiliate links, marked “(paid link)”.

This page includes Amazon affiliate links, marked “(paid link)”. As an Amazon Associate I earn from qualifying purchases. See the affiliate disclosure.

Why this page exists

Owners keep buying attachments that don't fit. These are the posts that led to this page:

  • r/Skidsteer 1nijr54: "bought a couple attachments and found that they don't fit. The attachment plate on the machine is too tall for the universal mini skid steer attachment."
  • r/Skidsteer 1kobu22: "front plate ... doesn't fit snug on two new implements I just got? It's like the pins are not long enough"
  • r/Skidsteer 1svft2y: "Quick attach on a 3rd party brush hog doesn’t latch, it just feels like something is blocking it" (new Bobcat T595)
  • r/Skidsteer 1mxd0v9: "WILL NOT FIT my Dingo ... poorly welded and ended up too tight by over 1/8 inch when mounting it"
  • r/Skidsteer 1jndvd0: "I just bought another attachment and the pins don't line up ... on all my other attachments, the inside pin is at 19.5""
  • r/Skidsteer 1nt7lq4: "looking for cheaper ways to attach mini skid steer attachments to full size skid steer" (the adapter plate was "like 900 bucks")
  • r/heavyequipment 1my9qqw: "Does anyone have experience they can share with this skid steer quick attach adapter for mini ex"
  • r/tractors 1baye2m: "Will a skid steer attachment work on a tractor?"
Quick answer

The short answer

  • Full-size skid steers and track loaders mostly use the "universal" skid steer quick attach (also called SSQA or UQA). Its geometry was defined by SAE J2513 (Compact Equipment) and is now covered by ISO 24410 (ISO).
  • Mini skid steers (stand-on / walk-behind compact utility loaders) use smaller plates. The two most common are the Toro Dingo-style "mini universal" plate, also called CII (Common Industry Interface), and the Bobcat MT plate (Skid Pro). Full-size and mini attachments do not swap without an adapter (Skid Pro; IronCraft).
  • Some cab-style machines are exceptions. Small cab Bobcats such as the 310, 313, 450, 453, 463, 520, 530, 533, 553F and S70 use a Bobcat MT-style plate, and small ASVs (RC-30, RT-30) use an ASV mini plate. Neither takes universal full-size attachments (IronCraft).
  • Fitting the plate is only the first check. Hydraulic flow and pressure, hose couplers, attachment weight and rated operating capacity also have to match (Skid Pro).

What "universal quick attach" actually is

SAE J2513 sets "standard dimension requirements for the loader attachment bracket and attachment interface to allow interchangeability of attachments on skid steer loaders whose operating mass ... is 4,500 kg or less" (SAE J2513, 2000 abstract). Three points from that standard matter to buyers:

The 2008 revision of SAE J2513 is listed as "Cancelled: May 2008" (ANSI Webstore). The active standard is ISO 24410:2020, which ISO says was "last reviewed and confirmed in 2025" (ISO). ISO 24410 sets "dimensional limits for the attachment mounting frame." It notes that skid steers "can use other styles of quick couplers but the coupler would not be interchangeable," and that couplers on "small skid steer loaders and some compact tool carriers can have a different width requirement" (its Annex B) (ISO).

Full-size plate dimensions you can check against

These numbers come from a copy of SAE J2513 (June 2000) hosted by Open Source Ecology (PDF). The standard is in millimetres. The inch conversions are written on the copy and are "NOT part of the SAE J2513 Standard."

Dimension (attachment side)Standard (mm)≈ inchesSource
Overall interface width (Figure 2, rear view)1131 min44 1/2J2513 Fig. 2–3
Other width dimensions shown at the lower latch area (Figure 2)698 max / 902 min27 1/2 / 35 1/2J2513 Fig. 2
Vertical span from top lip to lower latch edge (Figure 4 section)421–42316 9/16–16 5/8J2513 Fig. 4
Top lip (wedge) angle45°–47°n/aJ2513 Fig. 4
Lower face angle59°–61°n/aJ2513 Fig. 4

Read the drawing yourself before you fabricate anything. This table is a summary, not the standard, and it doesn't give exact latch-hole positions. If you need those, measure an attachment you know fits your machine.

Bobcat Bob-Tach

Bob-Tach is Bobcat's coupler. Bobcat says the Bob-Tach mounting plate "is standardised across compatible Bobcat Skid-Steer Loader models" (Bobcat). An independent guide says most current full-size S- and T-series Bobcats take ordinary universal attachments. It lists the usual trouble spots as MT minis, small or older frames, Power Bob-Tach wiring, flow mismatch, "bent plates, and worn latch points" (SkidSteerAttachments.ca). If a third-party attachment won't latch on a full-size Bobcat (as in 1svft2y), check those items first. Also make sure the latch slots on the attachment line up with your machine's lock pins (Skid Pro).

Why mini skid steer plates aren't standardized

No current mini plate standard has a public dimension table like J2513. ISO 24410 covers narrow loaders only through a separate width annex (ISO). Manufacturers ship different plates:

Published mini plate numbers don't agree

Here are the numbers sellers publish for the "same" mini plate. They differ by more than the 1/8 inch that stopped the Dingo owner in 1mxd0v9. They probably measure from different points (centre vs edge, inside vs outside), but none of them say so. Use them to identify your plate type, not to confirm a fit.

PlateWidthHeightPin spacingSource
Toro Dingo CII / mini universalabout 22.75 inabout 9.25 in14.5 in to centreSkid Pro
Toro Dingo mounting plate (weld-on)23 1/2 in horizontal8 1/2 in, top bar to bottom lip15 3/8 in centre-to-centreSkidSteers.com
Mini universal blank plate (weld-on)23 5/8 in i.d., 24 1/8 in o.d.9 3/4 in at tallest pointnot statedNH Skid Steer Attachments
Dingo / CUL mountapprox. 27.5–28 in (centre of vertical pins)approx. 13.5–14 in (centre of horizontal pins)pin dia. typically 1 inSmithCustomz (doesn't match the three rows above)
Bobcat MT (current U-shaped)about 35.5 in total15.75 in33.5 in centred; "prongs" 8.75 in wideSkid Pro

Skid Pro also says older MT50/MT55 machines used a different Bobcat plate than the current MT design (Skid Pro).

How to measure your plate (and the attachment)

The checks below come from attachment makers' fit guides (Skid Pro, SmithCustomz, SkidSteerAttachments.ca). Measure the machine's coupler and an attachment you know fits, then ask the seller for the same numbers on the attachment you want.

  1. Find the book answer first. Look up the make, model and serial number in the operator's manual (Skid Pro; SmithCustomz). For older or small Bobcats, check the serial number with a dealer (SkidSteerAttachments.ca).
  2. Take a straight-on photo of the coupler. Sellers use it to identify plates (Skid Pro).
  3. Width: on mini pin-style plates, measure from the centre of one vertical pin to the centre of the other (SmithCustomz). On full-size plates, compare the overall width with the 1131 mm (≈44 1/2 in) minimum in J2513 (J2513).
  4. Height: measure from the centre of the top horizontal pin to the centre of the bottom one (mini) (SmithCustomz), or from the top bar to the bottom lip (SkidSteers.com). Write down which one you measured.
  5. Pin diameter and pin spacing: measure the pins themselves (SmithCustomz) and the centre-to-centre spacing of the lock pins or holes. Measure centre to centre, not edge to edge.
  6. Latch / lock points: check that the attachment's locking slots line up with your machine's lock pins so the pins can fully engage (Skid Pro). The Case 1840 owner found every attachment that fit had its inside pin hole at 19.5 in, and the new one didn't (owner report; we haven't found a Case document that confirms this number, so measure yours).
  7. Top lip / wedge: the top lip angle on a J2513 plate is 45°–47° (J2513). Look for bends, weld beads or thick paint where the coupler seats. Bent plates and worn latch points are common reasons an attachment won't latch (SkidSteerAttachments.ca).
  8. Hydraulics: if the attachment is powered, match its flow, pressure and coupler sizes to the machine (Skid Pro). Flat-face coupler sizes are commonly 1/2 in for standard flow, 3/4 in for high flow and 3/8 in for case drains (IronCraft).

Unknown / measure yours: we found no maker-published dimension sheet for many Chinese mini skid steers or for older Case, Bobcat and ASV plates. Don't trust a listing that only says "universal mini." Ask the seller for the numbers above.

Checklist before you buy

Adapters

Every adapter adds weight and pushes the load forward. PROWORKS' listing says its mini-to-full-size adapter "moves the attachment farther forward from the loader and adds 172 pounds to the front of the machine," which "may reduce the loader’s effective lifting capacity, breakout force, stability" (listing). Full-size attachments may also be "too heavy or require more hydraulic capacity than a mini skid steer can safely provide" (same listing).

Mini attachments on a full-size skid steer (and the reverse)

AdapterDirectionListed specsPrice seen 2026-11-18
Worksaver 835215 Standard Skid Steer to Mini Universal AdapterFull-size machine → mini universal attachments (the 1nt7lq4 case)111 lb, max capacity 3,000 lb (Worksaver)$624.99 (Skid Steer Attachment Depot)
Worksaver 835010 Mini Universal to Standard Skid Steer AdapterMini universal machine → full-size attachments. Worksaver says it "does not fit Bobcat® MT/ASV/Polaris"127 lb, max capacity 2,000 lb (Worksaver)not checked
PROWORKS Mini Universal to Full Size adapterMini universal machine → full-size attachments; lists Toro Dingo, Boxer, Ditch Witch, Vermeer, Kubota SCL172 lb, made in USA$649.99 (listing)
Eterra Mini Universal to Standard Universal adapterMini universal machine → full-size attachmentsnot listed in the overview$1,095.00 (Skid Steer Solutions)
Berlon Mini Universal to Full-Size Universal adapterMini universal machine → full-size attachmentsmade in USA, 1-year warranty$1,512.90 sale / $1,681.00 list (SkidSteers.com)

Adapters between the mini universal (Toro Dingo) plate and the Bobcat MT plate also exist, in both directions (Skid Pro). On newer Bobcat minis, check whether the machine already has the CII option (Bobcat).

Mini excavator → skid steer quick attach

These mount on the excavator stick and give you a universal skid steer face for forks, grapples and buckets (the question in 1my9qqw).

Before ordering, measure your excavator's pin diameter, pin centres and ear width (inside the stick), because these are pin-on parts made for specific machines.

Tractor front-end loader → skid steer quick attach

Yes, a skid steer attachment can work on a tractor (1baye2m), but you need the right bracket for your loader and the loader has to handle the weight.

Sources

  1. ISO 24410:2020, Earth-moving machinery: Coupling of attachments to skid steer loaders. https://www.iso.org/standard/70043.html
  2. SAE J2513 (2000) abstract. https://doi.org/10.4271/j2513_200006
  3. ANSI Webstore, SAE J2513-2008 (Cancelled: May 2008). https://webstore.ansi.org/standards/sae/sae25132008j2513
  4. SAE J2513 JUN2000 text and drawings (Open Source Ecology copy). https://wiki.opensourceecology.org/images/b/b1/Universal-attachment-mount-specification-sae_j2513.pdf
  5. Compact Equipment, "Explaining Attachment Interface Pitfalls and Opportunities." https://compactequip.com/attachments/explaining-attachment-interface-pitfalls-and-opportunities/
  6. Bobcat, Skid-Steer Loader attachment buyer's guide. https://www.bobcat.com/cis/en/buyers-guides/product-guides/the-right-attachment-for-the-job-a-skid-steer-loader-buyers-guide
  7. Bobcat, MT100 vs Kubota SCL1000. https://www.bobcat.com/na/en/buying-resources/loaders/bobcat-mt100-loader-vs-kubota-scl1000-loader
  8. Toro, Compact Utility Loader Attachments FAQ. https://www.toro.com/en/professional-contractor/compact-utility-attachments
  9. Skid Pro, "Different Mini Attach Plates." https://skidpro.com/blog/different-mini-attach-plates/
  10. Skid Pro, "Skid Steer Quick Attach Explained." https://skidpro.com/blog/skid-steer-quick-attach-explained-universal-vs-proprietary-vs-mini-skid-steer-plates/
  11. IronCraft, "Will It Fit My Skid Steer?" https://www.ironcraftusa.com/guides/will-it-fit-my-skid-steer/
  12. SmithCustomz, "Mini Skid Steer Mount Types: Will It Fit?" https://www.smithcustomz.com/blogs/news/mini-track-loader-mount-types-your-complete-compatibility-guide
  13. SkidSteerAttachments.ca, "Bob-Tach vs Universal Quick Attach." https://skidsteerattachments.ca/guides/comparisons/bobtach-vs-universal-quick-attach/
  14. SkidSteers.com, Toro Dingo Mounting Plate. https://www.skidsteers.com/toro-dingo-mounting-plate/
  15. NH Skid Steer Attachments, Mini Quick Attach Plate. https://www.nhskidsteerattachments.com/skidsteer-attachments/p/mini-quick-attach-plate-toro-dingo-ditch-witch
  16. Worksaver, "Universal" Skid Steer Quick Attach System. https://www.worksaver.com/product-category/universal-skid-steer-quick-attach-system
  17. Skid Steer Attachment Depot, Worksaver 835215. https://www.skidsteerattachmentdepot.com/product/worksaver-skid-steer-to-mini-universal-adapter-835215/
  18. Skid Steer Attachment Depot, PROWORKS Mini Universal to Full Size adapter. https://www.skidsteerattachmentdepot.com/product/proworks-mini-universal-to-full-size-skid-steer-quick-attach-adapter-conversion/
  19. Skid Steer Solutions, Eterra Mini Universal to Standard Universal adapter. https://www.skidsteersolutions.com/mini-universal-to-standard-universal-skid-steer-adapter-eterra/
  20. SkidSteers.com, Berlon Mini Universal to Full Size adapter. https://www.skidsteers.com/mini-universal-skid-steer-to-full-size-universal-mount-adapter-berlon/
  21. Spartan Equipment, Mini Excavator to Universal Skid Steer adapter. https://www.spartanequipment.com/products/mini-excavator-mount-to-universal-fullsize-skid-steer-loader-adapter.html
  22. Construction Attachments, The Hookup. https://www.constructionattachments.com/product/skid-steer-universal-adapter-the-hookup/
  23. Skid Steer Attachment Depot, Worksaver 832660. https://www.skidsteerattachmentdepot.com/product/worksaver-832660-skid-steer-adapter-pin-on-loader-conversion/
  24. eSkidSteer, Top Dog Pin On to Skid Steer Adapter. https://eskidsteer.com/products/skid-steer-universal-adapter-top-dog-attachments
  25. FarmHack, Skidsteer quick attach standards SAE J2513. https://farmhack.org/tools/skidsteer-quick-attach-standards-sae-j2513

Owner quotes come from the Reddit threads linked in "Why this page exists" above. Found a wrong number? The About page explains how we source things.