Skid steer snow pusher size guide: what fits your machine's HP and weight, 8' vs 10', and pusher vs blower vs blade
This page includes Amazon affiliate links, marked “(paid link)”. As an Amazon Associate I earn from qualifying purchases. See the affiliate disclosure.
Need your machine's numbers? The Machine Lookup lists operating weight, rated operating capacity and aux flow for 170 models, each linked to the maker's spec page. Horsepower is on the maker spec sheets linked from each row.
Why this page exists
Every fall owners ask the same sizing question. These are the posts that led to this page:
- r/Skidsteer 1pal5kz: "Can I get by with a 10ft snow pusher or will that be too much?" (75 hp skid steer)
- r/Skidsteer 1ny9j4u: "I have a bobcat s650 wheeled machine 75hp weighs around 8k. What size pusher should I get?"
- r/tractors 1nvqnrd: "Used blowers are going for $2500 around here, would rather a pusher or plow for reliability."
- r/Skidsteer jf0ab6: "what are your thoughts on skidsteer blowers, strong? Fast? Reliable?"
- r/Skidsteer 1bkgizh: "any thoughts on a 72 vs 84 inch for a blower? I'm in Minnesota so we can get heavy wet snow." (Kubota SSV65)
The short answer
- Size a pusher by your machine's horsepower and operating weight. Pusher makers publish minimums. The lowest ones we found are about 35 hp for 6 ft, 45 hp and 5,500 lb for 8 ft, 70 hp and 7,000 lb for 10 ft, and 85 hp for 12 ft (Pro-Tech; Buyers; KAGE). One 10 ft pullback model is rated from 60 hp (Pro-Tech PB10S).
- Weight matters as much as HP. KAGE says the skid steer "must weigh enough to counter the weight of the pusher sticking out in front of the machine, including lifting for stacking", or it may tip forward when the pusher is lifted (KAGE).
- A Bobcat S650 (74.0 hp, 7,901 lb) meets every 10 ft minimum we found, but not the 85 hp listed for 12 ft (Bobcat spec PDF). See the worked examples.
- Heavy, wet snow: go smaller. KAGE: "A smaller pusher may be more effective, as it reduces strain on the skid steer and provides better maneuverability" (KAGE).
- Pusher vs blower vs blade: the box pushers below hook to the universal quick attach with no hydraulic hookup listed. A blower needs aux flow inside its GPM range (for example 11–28 GPM for Erskine's standard-flow 72" and 84", 26–38 GPM for its high-flow line) (Erskine SB300; Erskine SB360). A blade angles snow off to the side (Worksaver).
What size snow pusher fits my machine?
Pick your machine (139 current skid steers and track loaders, specs from each maker's spec sheet) or type its horsepower and operating weight. The calculator checks them against the pusher makers' published minimums in the sizing table. Full machine list and method: snow pusher size calculator.
The calculator needs JavaScript. Without it, read your machine's horsepower and operating weight across the sizing table.
Sizing table: pusher width vs machine HP and operating weight
Each cell is a maker's published minimum for that width on skid steers. Makers don't agree exactly, so the range is shown. If your machine is right at a minimum, size down or ask the maker. Arctic notes that "All sizing recommendations are subject to your machine’s age and condition" (Arctic).
| Pusher width | Minimum machine HP (published) | Minimum machine weight / lift (published) | Example machines the maker names |
|---|---|---|---|
| 6 ft | 35 hp: Pro-Tech SP06S (Pro-Tech); 35 hp: Arctic CD-6.5 (Arctic) | 5,000+ lb machine (KAGE); 1,200 lb min. lift capacity, Arctic CD-6.5 (Arctic) | Case SR130 and larger (KAGE); Bobcat 763, Case 410, Cat 216B Series 2 for the CD-6.5 (Arctic) |
| 8 ft | 45 hp: Pro-Tech SP08S (Pro-Tech); 46 hp: Buyers 2603108 (Buyers); 50 hp: Arctic LD-8 (Arctic) | 5,500 lb machine, Buyers 2603108 (Buyers); 6,000+ lb (KAGE); 1,750 lb min. lift capacity, Arctic LD-8 (Arctic) | Bobcat S510 and larger (KAGE); Bobcat S185/T180, Case 420, John Deere 318D/CT322 for the LD-8 (Arctic) |
| 9 ft | not listed by the makers we checked | 6,500+ lb machine (KAGE) | Cat 232D3 and larger (KAGE) |
| 10 ft | 60 hp: Pro-Tech PB10S pullback (Pro-Tech); 70 hp: Pro-Tech SP10S (Pro-Tech), Buyers 2603110 (Buyers), Arctic LD-10.5 (Arctic) | 7,000 lb machine, Buyers 2603110 (Buyers); 7,000+ lb (KAGE); 2,000 lb min. lift capacity, Arctic LD-10.5 (Arctic) | John Deere 318E and larger (KAGE); Bobcat S630, Case 430–450, Takeuchi TL240 for the LD-10.5 (Arctic) |
| 12 ft | 85 hp: Pro-Tech SP12S (Pro-Tech), Buyers 2603112 (Buyers) | 10,000 lb machine, Buyers 2603112 (Buyers) | not listed |
| 13 ft (Arctic LD-13, 156" wide) | 80 hp (Arctic) | 2,400 lb min. lift capacity (Arctic) | Bobcat T300/S300, Cat 262C, Takeuchi TL250 (Arctic) |
Arctic's example machines are older models (for example Bobcat S185, S630, S300), as printed on its chart. HLA rates its pushers the other way round, by the heaviest machine they're built for: 2500 Series up to 6,000 lb operating weight, 3400 and 3500 Series up to 15,000 lb (HLA). Check both ends: a light-duty pusher can be too weak for a big machine.
Mini skid steers and small frames: the smallest skid steer pushers above start at 35 hp or a 5,000 lb machine. KAGE's smallest SnowFire, 4.5 ft, is for "4,500+ lb skid steers (such as a Gehl 3935 and larger)" (KAGE). A Bobcat S70 (23.5 hp, 2,892 lb) is below all of these (Bobcat spec PDF), so look for a pusher or blade the maker rates for your mini specifically.
Worked examples (the machines owners asked about)
| Machine | Maker spec | 8 ft | 10 ft | 12 ft |
|---|---|---|---|---|
| Bobcat S650 (1ny9j4u) | 74.0 hp, 7,901 lb operating weight, 2,690 lb rated operating capacity (Bobcat) | Meets all minimums | Meets all minimums we found (70 hp, 7,000 lb, 2,000 lb lift) | Below the 85 hp Pro-Tech and Buyers list |
| "75 hp" skid steer (1pal5kz) | weight not given in the post | Meets HP minimums | Meets the 70 hp minimums. Also check the machine weighs 7,000 lb or more (Buyers; KAGE). If it's 6,500–7,000 lb, KAGE's chart points to 9 ft. | Below 85 hp |
| Kubota SSV65 (1bkgizh) | 64.0 hp gross, 7,099 lb operating weight with 165 lb operator (Kubota) | Meets all minimums | Mixed: meets KAGE's 7,000+ lb and Pro-Tech PB10S's 60 hp, but is under the 70 hp Pro-Tech SP10S, Buyers and Arctic list | Below 85 hp |
For your own machine, use the calculator above or the standalone snow pusher size calculator, or take its horsepower and operating weight from the maker's spec sheet (the Machine Lookup links one for every model) and read across the sizing table.
Pusher specs and prices from the makers
Nominal size and real width differ. Bobcat's "8 ft." pusher is 102 in wide and its "10 ft." is 128 in (Bobcat 8 ft; Bobcat 10 ft). Measure your trailer and gates with the real width.
| Model | Width | Pusher weight | Min. machine | Listed price | Source |
|---|---|---|---|---|---|
| Pro-Tech SP06S Rubber Edge | 6' | 650 lb | 35 hp | $3,699 | Pro-Tech |
| Pro-Tech SP08S Rubber Edge | 8' | 800 lb | 45 hp | $3,999 | Pro-Tech |
| Pro-Tech SP10S Rubber Edge | 10' | 950 lb | 70 hp | $4,399 | Pro-Tech |
| Pro-Tech SP12S Rubber Edge | 12' | 1,100 lb | 85 hp | $4,699 | Pro-Tech |
| Pro-Tech PB08S Pullback | 8' | 975 lb | 45 hp | $5,499 | Pro-Tech |
| Pro-Tech PB10S Pullback | 10' | 1,130 lb | 60 hp | $5,999 | Pro-Tech |
| Buyers 2603108 | 8' | 950 lb | 46 hp, 5,500 lb | not listed | Buyers |
| Buyers 2603110 | 10' | 1,125 lb | 70 hp, 7,000 lb | not listed | Buyers |
| Buyers 2603112 | 12' | 1,250 lb | 85 hp, 10,000 lb | not listed | Buyers |
| Arctic LD-8 Sectional | 96" | 1,150 lb | 50 hp, 1,750 lb lift | not listed | Arctic |
| Arctic LD-10.5 Sectional | 126" | 1,792 lb | 70 hp, 2,000 lb lift | not listed | Arctic |
| Bobcat Snow Pusher, 8 ft. | 102" | 1,122 lb | not listed on the page | not listed | Bobcat |
| Bobcat Snow Pusher, 10 ft. | 128" | 1,256 lb | not listed on the page | not listed | Bobcat |
| Hiniker 3808 | 8' | 836 lb (1,031 lb with pull-back) | not listed | not listed | Hiniker |
| Hiniker 3810 | 10' | 917 lb (1,140 lb with pull-back) | not listed | not listed | Hiniker |
| KAGE SnowFire Xtreme | 6–10 ft | "1,200 to around 1,600 pounds" | see sizing table | not listed | KAGE |
Prices are the maker's list prices on 2026-11-19, before freight and dealer pricing.
8' vs 10': what else decides it
- Snow type. Light, fluffy snow: "Larger pushers can handle more volume with ease." Heavy, wet snow: a smaller pusher "may be more effective" (KAGE).
- Lot size and obstacles. Wide pushers clear large open areas faster. Narrower ones get around "curbs, corners, and parked vehicles" more easily (KAGE).
- Transport and storage. KAGE notes a larger pusher "may be difficult to transport or store" (KAGE). Remember the real width (a "10 ft." Bobcat pusher is 128 in, per Bobcat).
- Tight spots and doors. A back-drag (pullback) edge lets you pull snow away from loading docks, doorways and parking spots (Pro-Tech). Buyers and Hiniker sell bolt-on back-drag / pull-back kits (Buyers; Hiniker).
- Hard-pack and uneven pavement. KAGE recommends a live or sectional edge for compacted or icy snow (KAGE). Arctic's sectional pushers use independent 30-inch sections on LD models with spring-loaded trip edges (Arctic). Rubber edges "squeegee" the surface (Pro-Tech).
Pusher vs snow blower vs blade
| Box pusher | Snow blower | Blade (straight, angle or V) | |
|---|---|---|---|
| What it does | "Contains and pushes snow into piles" (Pro-Tech) | Throws snow: up to 40 ft (Erskine SB300) or 45 ft (SB360) (Erskine; Erskine) | Angles snow to the side; the Worksaver blade "angles right or left" (Worksaver). Blue Diamond's V-blade runs V, scoop, straight or angled up to 30° (Blue Diamond) |
| Hydraulics needed | None listed for the fixed box pushers above; they mount on the universal quick coupler (Buyers; Hiniker). Angling systems such as KAGE SnowFire plug into the machine's aux hydraulics (KAGE) | Yes, and flow must be in range: Erskine SB300 11–22 GPM (48–60") or 11–28 GPM (72–84"); SB360 26–38 GPM; both 2,500–3,500 psi (SB300; SB360) | For powered angle: Worksaver 9' has a hydraulic angle kit standard, the 7-1/2' is manual (5 positions) with hydraulic optional (Worksaver); Blue Diamond uses electro-hydraulic controls (Blue Diamond) |
| Typical weight | 650–1,792 lb for the 6–10 ft skid steer pushers in our table | 705–886 lb (SB300, 48–84"); 865–1,003 lb (SB360, 60–84") (Erskine; Erskine) | 646 lb (Worksaver 7-1/2' skid steer), 735 lb (9') (Worksaver); 823–943 lb (Blue Diamond 6–9') (Blue Diamond) |
| Machine size | See the sizing table | Set by aux flow, not HP (see the GPM ranges) | Worksaver: 40–80 hp (7-1/2'), 50–95 hp (9') (Worksaver). Blue Diamond float kit for skid steers over 50 hp (Blue Diamond) |
| Listed price | $3,699–$4,699 (Pro-Tech Rubber Edge, 6–12 ft) (Pro-Tech) | not listed by Erskine; one owner says used blowers "are going for $2500 around here" (1nvqnrd) | not listed on the maker pages we checked |
Kubota SSV65 owner asking 72" vs 84" blower (1bkgizh): Kubota lists 18.0 GPM standard flow and 28.0 GPM with the high-flow option on the SSV65 (Kubota). That fits Erskine's standard-flow SB300 range (11–28 GPM) in both 72" (73" cut, 831 lb) and 84" (85" cut, 886 lb) (Erskine). The high-flow SB360 needs 26–38 GPM, so it needs the high-flow option (Erskine). Erskine says GPM and psi are the "two important factors" when choosing a skid steer blower (Erskine). We found no maker data that settles 72" vs 84" in wet snow, so we don't make a call on that.
Are blowers reliable (jf0ab6)? We have no reliability data and don't rank brands. What the maker sheets do show: a blower is a powered attachment that depends on your aux flow and pressure, while a box pusher has no hydraulic hookup listed. If reliability is your worry (as in 1nvqnrd), that difference is the place to start.
Sources
- Pro-Tech Sno Pusher, Rubber Edge Sno Pusher (skid steer SP06S–SP12S specs and prices). https://snopusher.com/product/rubber-edge-snow-pusher-plow/
- Pro-Tech Sno Pusher, Pullback Sno Pusher (PB06S–PB12S specs and prices). https://snopusher.com/product/back-drag-edge-snow-pusher/
- Buyers Products, ScoopDogg snow pushers catalog (PDF). https://www.buyersproducts.com/UserFiles/Print-Catalogs/LITPUSHERS_G.pdf
- KAGE Innovation, Skid Steer Snow Pusher Sizing Recommendations. https://kageinnovation.com/skid-steer-snow-pusher-size-recommendations/
- KAGE Innovation, SnowFire skid steer snow plow system. https://kageinnovation.com/snowfire-skid-steer-snow-plows/
- Arctic Snow & Ice Products, Sectional Sno-Pusher (sizing chart). https://arcticsnowproducts.com/sectional.php
- Arctic Snow & Ice Products, Sectional Sno-Pusher operational procedures (PDF). https://www.arcticsnowandiceproducts.com/assets/pdfs/sectional-sno-pusher/sectional-sno-pusher-operational-procedures-web.pdf
- HLA Snow, SnowPusher Series. https://www.hlasnow.com/snowpusher.php
- Hiniker, 3800 Series skid steer snow pusher. https://snowplows.hiniker.com/skid-steer-plows/snow-pusher/
- Bobcat Snow Pusher, 8 ft. (Bobcat attachment page on dealer Bobcat Compact Construction Equipment). https://www.bobcatcce.com/new-attachments/compact-track-loaders/snow-pusher/snow-pusher-8-ft
- Bobcat Snow Pusher, 10 ft. (same dealer). https://www.bobcatcce.com/new-attachments/compact-wheel-loaders/snow-pusher/snow-pusher-10-ft
- Bobcat 2026 Full-Line Equipment Specifications (PDF, Bobcat document hosted by dealer Bobcat Central). https://www.bobcatcentral.com/images/Bobcat_Full-Line_Equip-Specifications%202026.pdf
- Kubota SSV65/SSV75 brochure (PDF). https://www.kubotausa.com/docs/default-source/brochure-sheets/ssv-brochure.pdf
- Erskine Attachments, Hydraulic Snowblower SB300 Series (PDF). https://dashboard.erskineattachments.com/storage/1774689449-ERSKINE-Hydraulic-Snowblower-SB300-Series-012425.pdf
- Erskine Attachments, Hydraulic Snowblower SB360 Series (PDF). https://dashboard.erskineattachments.com/storage/1774689464-ERSKINE-Hydraulic-Snowblower-SB360-Series-012425.pdf
- Worksaver, 27-Series Snow Blade 7-1/2' and 9'. https://www.worksaver.com/product/27-series-snow-blade-7-and-1-2-and-9-widths
- Blue Diamond Attachments, Skid Steer Snow Plow V-Blade. https://www.bluediamondattachments.com/attachments/skid-steer-v-blade
- Blue Diamond Attachments, Snow Plow V-Blade spec sheet (PDF). https://www.bluediamondattachments.com/uploads/specs/Blade-Snow-Plow-V-Blade-Spec-Sheet-062723.pdf
Owner quotes come from the Reddit threads linked in "Why this page exists" above. Machine horsepower and weight come from the maker spec sheets listed. Found a wrong number? The About page explains how we source things.